EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is really a hugely economical photo voltaic controller designed for off-grid solar techniques. Based upon multiphase synchronous rectification technologies, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Essential Functions with the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technological innovation for remarkable photo voltaic Electricity harvesting. Vital options include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery existence.
Liquid crystal display Exhibit with actual-time info monitoring.
Several Load Handle Modes which includes manual and timer.
Complete Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Getting ready the Controller
Make certain all elements are incorporated: Tracer AN device, temperature sensor, communication cables, and consumer manual.
Confirm the product range and voltage rankings match your solar panel and battery specifications.
two. Mounting the Charge Controller
Select a very well-ventilated, dry area near the battery financial institution.
Protected the Tracer AN controller utilizing the supplied mounting brackets.
Preserve suitable clearance for heat dissipation.
three. Wiring the Solar Demand Controller
Warning: Constantly comply with appropriate basic safety protocols and ensure the method is powered off before connecting factors.
Action 1: Connect the battery terminals to the demand controller (constructive to optimistic, negative to destructive).
Move two: Connect the photo voltaic panel array for the PV input terminals.
Move three: Hook up the load terminals if using a direct load link.
Step four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity around the controller by connecting the battery first.
Make use of the Liquid crystal display Exhibit to navigate the options menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Guide, timer, mild Command.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 conversation port More info using program including Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Typical Concerns
Situation one: No Energy Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technological know-how guarantees:
Bigger Efficiency: Minimized energy losses through conversion.
Enhanced Dependability: Steady overall performance underneath variable loads.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is surely an Remarkable choice for optimizing solar power technology and extending battery existence. By pursuing the above setup information, buyers can make sure greatest performance and system longevity.